
Brushless Clinical Micromotor WJ-60A
The electric drive source with selectable ratio indication.
- 2,000–40,000 RPM
- 3.4 N·cm motor torque
- <60 dB · DC 24V
Electric dental handpieces use an electric micromotor to drive interchangeable contra angles, with controlled motor speed and torque for restorative, polishing and finishing workflows.
HYDRUMP offers brushless clinical micromotors and 1:1, 1:5 and 1:4.2 contra-angle options, depending on the selected configuration.
Motor system + separately selected attachmentAn electric dental handpiece system uses an electric micromotor, rather than an air turbine, as its primary drive source. The controller, motor and attachment have distinct roles, so compare the complete setup rather than the handpiece alone.
The motor drives an interchangeable attachment that transfers rotation to the bur. Options include 1:1 contra angles, speed-increasing contra angles and compatible reduction attachments. A 1:1 attachment follows motor speed approximately; a 1:5 increases it. Final speed depends on motor speed and gear ratio, and the controller setting must match the attachment.
HYDRUMP’s brushless clinical motor WJ-60A has catalog-listed settings of 16:1, 1:1 and 1:5; separate contra-angle listings include 1:1, 1:5 and 1:4.2. These are options, not one fixed kit. Confirm interfaces, cooling and package contents before ordering. Explore the low-speed handpiece range for other motor-driven attachments and reduction options.
Sets motor speed, direction and the applicable ratio configuration.
WJ-60A operates at 2,000–40,000 RPM with 3.4 N·cm catalog-rated motor torque.
A compatible contra angle converts motor output according to its gear ratio and drives the bur.
Drive path: controller → brushless motor → contra angle → bur. Motor torque is not a bur-torque specification.
Select the drive system and attachment around your requirements. The available motor/controller and handpiece configurations depend on the selected setup; the WJ-60A does not automatically include every attachment.

The electric drive source with selectable ratio indication.

A speed-increasing attachment for selecting a motor-driven high-speed configuration.

Direct-drive configuration for applications requiring motor-speed output.

An alternative speed-increasing ratio. Confirm the intended motor and controller setup.
Selected models offer small heads, slim bodies, quad-point irrigation, imported bearings and stainless-steel press-type back covers. Attachment air-pressure and noise figures are catalog data for the individual contra angles, not motor specifications. Confirm the cooling / air-supply requirements for the proposed system.
The ratio describes how the attachment changes motor speed. A 1:5 increasing handpiece increases speed; it does not reduce it.
| Ratio | How It Changes Motor Speed | Available HYDRUMP Model | Typical Selection Logic |
|---|---|---|---|
| 1:1 | Output speed follows the motor approximately 1:1. | 120099-1 | Choose direct drive when motor-speed output fits the requirement. |
| 1:5 | Output speed increases to approximately 5× motor speed. | 120010 | Consider for an electric high speed dental handpiece configuration, subject to compatibility. |
| 1:4.2 | Output speed increases to approximately 4.2× motor speed. | 120166 | Consider this alternative increasing ratio with a confirmed motor/controller setup. |
These ranges are tied to the WJ-60A controller data and require compatible attachments. The catalog does not provide a 1:4.2 output range or show a 1:4.2 controller setting; no final RPM or WJ-60A pairing is asserted here.
This comparison concerns air-turbine handpieces. Air motors can also drive separate attachments. For turbine-based options, browse high-speed dental handpieces.
| Consideration | Electric | Air-driven / turbine |
|---|---|---|
| Drive source | Electric micromotor | Compressed air driving a turbine |
| Speed control | Controller + motor + attachment gear ratio | Air-pressure / turbine system |
| Attachments | Interchangeable motor-driven attachments, depending on the system | Turbine handpiece configuration |
| System components | Controller + motor + compatible attachment | Air supply + turbine handpiece |
| Selection consideration | When motor-driven operation and available attachment ratios fit the workflow | When an air-turbine setup fits the existing chair and workflow |
The appropriate choice depends on the selected equipment and workflow. Motor type alone does not establish clinical superiority, noise at the bur or torque at the bur.

WJ-60A · Brushless clinical drive system
A compact controller and brushless motor with speed adjustment, forward/reverse selection and 16:1, 1:1 and 1:5 ratio indications.
| Model | WJ-60A |
|---|---|
| Number | 130002 |
| Rotation speed | 2,000–40,000 RPM |
| Motor torque | 3.4 N·cm |
| Noise | <60 dB |
| Input | DC 24V |
| Motor size | Ø22 × L71 mm |
| Motor weight | 71 g |
| Controller size | L150 × W128 × H55 mm |
| Total weight | 1250 g |
| Ratio settings displayed | 16:1 / 1:1 / 1:5 |
Catalog reference: Product catalog, brushless clinical micromotor, PDF page 21. Attachment specifications are listed separately on PDF page 20.
Request WJ-60A PricingStart with the operating range required for your intended workflow. Distinguish motor RPM from the output of the attached handpiece.
Compare direct-drive 1:1, increasing 1:5, increasing 1:4.2 or another compatible configuration. A controller setting must match the actual attachment.
Confirm the selected motor, interface, attachment and controller configuration together. A universal-interface description alone does not confirm every combination.
The contra-angle range includes quad-point irrigation. Confirm the selected model’s cooling connections and supply requirements with the product team.
Selected contra angles are described as resistant to high-temperature/high-pressure sterilization. Follow their instructions; do not apply that claim to the motor or controller.
Ask for model-specific cleaning, lubrication and service instructions, plus availability of replacement attachments. Confirm what is included in the quotation.
Depending on the selected attachment and configuration, motor-driven systems support restorative, treatment, polishing and finishing workflows. Confirm the intended use in the selected product’s instructions.
Select the speed range, attachment and cooling configuration required for the intended restorative work.
The contra-angle catalog describes polishing and finishing applications. Choose a compatible ratio and accessory for the task.
A compatible 1:5 increasing attachment provides higher output speed than the motor alone.
Review the complete motor, attachment and accessory setup. The wider company portfolio does not establish WJ-60A suitability for every procedure.
For other clinical motor systems and related devices, explore dental equipment.
Our company catalog traces dental handpiece manufacturing experience to 2006, with a focus on high-speed and low-speed handpieces.
Its development portfolio includes clinical low-voltage motors and 1:5 speed-increasing handpieces. For distributors and purchasing teams, contact HYDRUMP to discuss model selection, specifications and B2B pricing.
Company reference: Productos dentales Myrick, company profile, PDF page 2.
An electric dental handpiece system uses an electric micromotor to drive an interchangeable attachment, such as a direct-drive or speed-increasing contra angle.
The controller sets the motor speed and direction. A compatible attachment transfers or changes that speed according to its gear ratio and drives the bur. The controller setting must match the attachment.
An electric system uses a motor, controller and attachment. An air-turbine handpiece uses compressed air to drive a turbine. Select the system around your equipment, required speed range and workflow.
A 1:5 increasing contra angle increases output speed to approximately five times motor speed; it does not reduce speed. The WJ-60A catalog lists 10,000–200,000 RPM for its 1:5 configuration with a compatible attachment.
A 1:1 contra angle transmits motor speed approximately 1:1. HYDRUMP model 120099-1 is the catalog-listed direct-drive option.
The motor is rated at 2,000–40,000 RPM. Its catalog lists configuration ranges of 100–2,500 RPM at 16:1, 2,000–40,000 RPM at 1:1 and 10,000–200,000 RPM at 1:5. These are controller configuration data, not the motor speed for every attachment.
Compatibility should be confirmed for the selected motor, interface and handpiece configuration. The WJ-60A displays 16:1, 1:1 and 1:5 settings; the separately listed 1:4.2 attachment is not a displayed controller setting or a confirmed bundled component.
Contact HYDRUMP by WhatsApp or email with your preferred motor, attachment ratio, models and quantity. Ask the team to confirm compatibility, package contents, specifications and B2B pricing for the selected setup.
Contact our team to discuss electric micromotors, contra-angle configurations, product specifications and B2B pricing.